User`s manual

THE PATTERN SEQUENCER
Monomachine SFX-6/60 USER’S MANUAL 57
NOTE COPY
Individual note steps, including chords and parameter locks, can be copied
and pasted. Hold the [TRIG] key for the step you want to copy and press
[COPY]. Release the keys and then hold the [TRIG] key for the step you
want to paste the note to and press [PASTE].
If you hold a [TRIG] and press [CLEAR] all parameter locks will be cleared.
PAGE COPY
In Grid Composing mode you can copy, clear and paste individual track
pages of 16 steps each. This can be handy when working with scale lengths
above 16. See section “SCALE, PAGES AND TIME SIGNATURES” on
page 51 for more information on how to set Scale length and more informa-
tion about pages.
To perform Page Copy, make sure you are in Grid composing mode, and
press [COPY] while holding [SCALE]. The current page (the 16 steps
accessible by the [TRIG] keys) will be copied into the Page copy buffer. Use
the [SCALE] key to cycle to the destination page and then press [PASTE]
while holding [SCALE]. Page clear is performed analogue by pressing
[CLEAR] while holding [SCALE].
Page Copy operates on trigs, pitches and parameter locks.