User`s manual

THE PATTERN SEQUENCER
56 Monomachine SFX-6/60 USER’S MANUAL
• Pasting data into a track overwrites any previous data.
• The track data copied consists of notes, parameter locks, the
machine selection, Data Entry pages and Arpeggiato, Transpose,
Swing and Slide settings. Note that track copy alters the kit.
SUPER COPY
For Track, Pattern and Machine copy/clear/paste, the default action can be
exchanged. Hold the [FUNCTION] and [COPY] for around a second and
the default message-box will expand to a larger one including a selection
box.
You can now release function while holding [COPY]. While still holding
[COPY], use the [UP] and [DOWN] keys to manoeuvre the inverted selec-
tion box. When [COPY] is released the selected copy action will be per-
formed.
• The Track and Pattern selections are known from the previous sec-
tions.
• Melody copy is a special copy function which copies all pitch data
from the track, but excludes parameter locks and machine selection
and settings. Use this to transport a melody between tracks you are
using different machines for.
• The machine selection is a shortcut for copying the machine selec-
tion and all Data Entry pages, which is normally performed from the
EDIT KIT window.
Paste works analogue to the copy just described. Note that you can only
reach the super copy selections from Pattern, Track and Machine copy.
The Super Clear function works analogue to the copy and paste, with the
difference that Melody is exchanged for Clear Locks. Selecting Clear Locks
will erase all Parameter locks for the track.
• All Super Copy functions are delayed until the [COPY], [CLEAR] or
[PASTE] key is released. So even if you get the message “PATTERN
CLEAR” it is not performed until the [COPY], [CLEAR] or [PASTE]
key is released, so that you get the chance to change the default
action in the selection box. This delay is only valid for Copy/Clear/
Paste for Pattern, Track and Machine, which will invoke super copy.
• You can cancel Super Copy/Clear/Paste with [EXIT/NO].