User`s manual

THE PATTERN SEQUENCER
54 Monomachine SFX-6/60 USER’S MANUAL
Chaining is indicated by a double arrow between the current and the next
pattern.
[STOP] will reset the pattern chain to the beginning. Pressing [STOP] twice
will exit the pattern chaining and return to normal operation. Selecting a new
pattern exits pattern chaining as well.
PATTERN COPY CLEAR PASTE
Copy, clear and paste is a vital part of song composing, and it is important to
have the right function close at hand. The Monomachine offers many types
of copy, clear and paste functions through the [FUNCTION] + [COPY],
[CLEAR] and [PASTE] keys. This section will deal with the copy, clear and
paste functions in pattern mode.
• All clear and paste operations can be undone if the clear or paste
function is repeated immediately after if was first performed.
FULL PATTERN COPY
To copy the contents of a full pattern to another, follow the steps below.
1. Make sure that the “RECORD” LED is not lit, so you are not in grid com-
posing mode.
2. Select the source pattern. Hold [FUNCTION] and then press [COPY]. A
message “COPY PATTERN” will be shown in the display.