User`s manual

ADDITIONAL KIT SETTINGS
Monomachine SFX-6/60 USER’S MANUAL 41
• All arpeggiators of the tracks retain their function in the All Track
Multi Trig mode. Interesting results can be yield with different
arpeggiator settings and speeds for the tracks that then are acti-
vated in parallel from the Multi Trig channel.
MULTI TRIG SPLIT MODE
The Split mode allows you to split the keyboard in two zones, each one con-
trolling a part of the tracks by the upper and lower part.
There is an additional tab for the split mode, named “ZONES”. From the
Zones tab you control which tracks will be devoted to the upper and the
lower part of the keyboard, and where the split point is located on the key-
board.
The TRACK parameter controls which will be the first track to be controlled
by the upper part of the keyboard. All tracks above this one will be controlled
by the upper part and the rest by the lower.
The KEY parameter controls which key is the first to control the upper part
of the tracks. All keys above this one will be directed to control the upper
section of the tracks.
MULTI TRIG SEQUENCER START AND SEQUENCER TRANSPOSE
Sequencer Start (“SEQ START”) and Sequencer Transpose (“SEQ
TRANSP”) are two modes of the Multi Trig which invoke the sequencer for
creating advanced monophonic soundscapes or looped melodies for real-
time manipulation.
• The Sequencer Start mode makes the sequence restart for each note
played. The sequence will be transposed based on which note is
played. The original pitch will be invoked on C-4. The Multi Env is
trigged when notes are played (see page 42).
• The Sequencer Transpose mode starts and transposes the
sequence for the first note received on the Multi Trig channel. Sub-
sequent notes will only transpose the sequence and trig the Multi
Env, so that the sequence loop is never broken.
The action of the Sequencer Start and Sequencer Transpose modes can be
delayed to an even bar of the loop. This is controlled by the context menu
named “TIMING”. If you want to stay in the beat, set the Timing parameter to
what you prefer. A setting of 16/16 delays the action until a full page of 16
trigs is played (four beats) in single speed mode.