User`s manual

ADDITIONAL KIT SETTINGS
Monomachine SFX-6/60 USER’S MANUAL 39
There are two additional parameters on the Key Tracking controlling if the
high pass and/or low pass filter should automatically track the pitch.
The HPF = High Pass Filter Tracking parameter set to OFF discon-
nects the standard filter tracking of the high pass filter.
The LPF = Low Pass Filter Tracking parameter set to OFF discon-
nects the standard filter tracking of the high pass filter.
See page 28 for more information on the filter.
TRIG TRACK SETTINGS
The Trig Track Settings is a group of parameters which affect the way cer-
tain aspects of the sound in the track are trigged.
You find the Trig track window in the Kit menu. Press the [KIT] key and nav-
igate to the TRIG track icon using the [CURSOR] keys, then press [ENTER/
YES] to enter the Trig track menu.
In the Trig track window you will find five parameters. Navigate between the
parameters using the [UP] and [DOWN] keys. Use the [LEFT] and [RIGHT]
keys to adjust the parameter values.
TRIG POS
The Trig pos parameter allows you to forward the notes being played to the
current track to another.
For example, if you edit Trig Pos for “Track 1”, and set it to point to “Track 3”,
then Track 3 will also play notes that are sent to Track 1.
You can link Trig Pos, so that several tracks can be trigged from
one.
TRIG PORTAMENTO
The Trig Portamento switch has two options:
Always: the portamento will always be active, gliding between all
notes played.
Only legato: the portamento is active only when playing overlapped
so called legato notes.
LEGATO TRIG MODES
The three parameters at the bottom of the window control which of the AMP,
FILTER and LFO trigs will be active for notes played legato.