User`s manual

ADDITIONAL KIT SETTINGS
38 Monomachine SFX-6/60 USER’S MANUAL
• All Assign settings can be copied cleared and pasted using [FUNC-
TION] + [COPY] [CLEAR] and [PASTE]. All tabs are copied as a
whole, for easy transformation to other tracks or kits.
JOYSTICK
The first two to four tabs contain the parameters for the joystick.
The first tab can control the right or the left, or both right and left directions of
the joystick, depending of the value of the MIRR = Mirror parameter.
• If Mirror is set to OFF, the right and left directions of the joystick
have individual parameter pages named “JOY R” and “JOY L”.
• If Mirror is set to ON, the right and left directions get the same set-
tings. The parameters of the “JOY RL” page are applied to the right
direction, and inverted for the left.
The “JOY U/D” tab has the same function as the “JOY R/L” just described,
but controls the assign for the up and down directions of the joystick.
• Information for the SFX-60 module, and for controlling the SFX-6
externally: The Joystick is mapped to Pitch bend for left and right
directions, Modulation Wheel (CTRL_CHANGE#1) for upward direc-
tion and Breath controller (CTRL_CHANGE#2) for downward direc-
tion.
VELOCITY
The “VEL” tab controls the assignments for Key velocity. Key velocity is the
name for how hard the key is played on the keyboard, or more correctly, the
amount of time it takes from the key is pressed until it reaches the base. No
parameters additional to the Destination and Add/Depth are found here.
• The key velocity control is mainly for live keyboard playing or
sequencing with an external sequencer. The internal sequencer
always plays notes with velocity set to 100. Volume and other
parameters are instead usually controlled with the parameter locks.
KEY TRACKING
The “KEY” tab controls the assignment for Key Tracking. The Key Tracking
is connected to the note index from the last key pressed. For example, if C-
1 was pressed, the Key Tracking value will be low, and if C-8 was pressed it
would reach almost its maximum value.