User`s manual
TRACK EFFECTS
Monomachine SFX-6/60 USER’S MANUAL 27
FIGURE 2. Simplified visualisation of headroom and distortion
TRACK VOLUME
The Volume (“VOL”) parameter is a track volume separated from the Level
overall gain control. Volume is a track parameter that can be locked to sepa-
rate notes, and it can be controlled by the LFO system.
PAN
The Pan parameter controls the stereo panning for the stereo output. It
operates in stereo when needed, for example when effecting FX Machines.
The default value is center.
PORTAMENTO
The Portamento (“PORT”) parameter is placed on the Amplification page in
lack of a more correct place.
Portamento controls the sliding between two consecutive notes played. A
slow portamento speed gives the effect of a slow pitch-bend up to, or down
to the next note. The portamento of the Monomachine uses the time speci-
fied by the Portamento parameter to slide between any two notes.
See also section “TRIG TRACK SETTINGS” on page 39 for information on
the Trig Portamento setting in the KIT>TRIG menu.
• Use the parameter lock feature in the sequencer to control the porta-
mento speed individually for separate notes.