User`s manual

TRACK EFFECTS
Monomachine SFX-6/60 USER’S MANUAL 25
TRACK EFFECTS
The Track Effects are independent effects systems, available to the six
tracks as extensions to the machine synthesis. This chapter is a reference
to all the functions you will find on the Data Entry pages.
The Track Effects are applied to the sound signal in stereo in the order as
described in the figure below:
First select a track using the [TRACK] keys that you want to alter the Track
Effects for. If you want to hear the effect of the EQ or the Filter, it is wise to
choose a machine that generates full harmonic contents, such as the
SWAVE-SAW. The GND-SIN only contains power in one single frequency,
and will not provide a good base for understanding of the EQ and Filter.
Then use the [DATA PAGE] keys to locate the relevant Data Entry page.
The <DATA ENTRY> LED’s indicates which Data Entry page is currently
selected, and the DATA ENTRY encoders now control the parameters of the
Data Entry page selected.
LEVEL
The Level (“LEV”) parameter is available from all Data Entry pages. You can
always reach it with the dedicated LEVEL encoder.
Level controls the overall audio level of the track. It is applied at the end of
the audio signal path of the track. The Level is designed as a master level
control that can not be locked or assigned as a destination from the LFO’s or
Assign. If you want to do this, use the Track Volume parameter on the
Amplification page. See section “TRACK VOLUME” on page 27 for more
information on this parameter.
AMPLIFICATION PAGE
In the Amplification page you find the controls for the amplifier envelope
(AHDR), Distortion, Volume, Pan and Portamento.
AMPLIFIER ENVELOPE
The amplifier envelope is trigged every time an AMP-trig is received. This
normally happens when a key has been pressed on the Keyboard or the
[TRIG] keys, or played from the sequencer or received over MIDI. The