User`s manual

MONOMACHINE SYNTHESIS ARRANGEMENT
22 Monomachine SFX-6/60 USER’S MANUAL
• The Mono-synth and the machine currently assigned to the track are
indicated by inverted selection boxes. The focus, when moved away
from the machine currently loaded, is a hollow square box. When
[ENTER/YES] is pressed, the current focus will be assigned, thus
changing the square hollow focus to the inverted box.
• From inside the Edit Kit window you can copy clear and paste the
machine selection, together with all parameter settings of the Data
Entry pages using the [COPY], [CLEAR] and [PASTE] keys while
holding [FUNCTION]. See section “SUPER COPY” on page 56 for
more information.
SETTING THE MIX BUS
The Mix bus settings can be used for directing to which audio outputs the
audio of the machine should go. It can also be used for advanced routing
using FX machine effects.
When FX machines are not used for any tracks, and the master routing is
not changed from the default “3xSTEREO”, the OUT BUS selection in the
MIX column only select to which pair(s) of stereo outputs the audio output of
the machine will be directed.
For more information on FX machines and how the Mix bus routing can ben-
efit them, please check section “MONOMACHINE ROUTING” on page 81.
PARAMETER EDITING
Each Monomachine track offers 56 parameters for the sound generation
and effects. They are divided into seven pages with eight parameters in
each.
The sound generating machines forms their sound from one page of up to
eight parameters, named the Synthesis parameters. The Track Effects are
composed from 24 parameters, divided into three pages of Amplification,
Filter and Effects. There are also three pages for the LFO’s, these brings 24
parameters in total.
First, exit all windows using [EXIT/NO], and see to that you are in the base
pattern edit mode (see section “RECORDING PREPARATIONS” on
page 44). You should see the base window displayed below. The visual
parameter names and symbols will depend on the machine assigned.
Use the [DATA PAGE] keys to control the focus of the DATA ENTRY encod-
ers. The <DATA PAGE> LED’s will indicate the current focus and the visual
parameters will be updated depending on the focus.