User`s manual

MONOMACHINE SYNTHESIS ARRANGEMENT
Monomachine SFX-6/60 USER’S MANUAL 21
ASSIGN A MACHINE TO A TRACK
Open the KIT window and select menu position EDIT using the [CURSOR
KEYS].
Press [ENTER/YES] to enter the EDIT KIT Menu.
The EDIT KIT menu is used for selecting machines from the selection avail-
able from the Mono-synths, and for specifying to which audio mix bus the
output should be directed. For FX machines you also select the audio input
for the machine. Read more about FX machines and routing in section
“MONOMACHINE ROUTING” on page 81.
The <TRACK> LED’s indicate which track you are editing, and it is also dis-
played in the name bar at the top of the window. To change the track in
focus, use the [TRACK] keys.
Use [LEFT] and [RIGHT] to move between the “SYNTH”, “MACHINE” and
“MIX” columns. [LEFT] and [RIGHT] are also used for moving between the
out bus positions, and for FX machines as well to move to the selections in
the INPUT row below. You will notice that the name of the active column is
inverted. You can use the [UP] and [DOWN] arrows to choose from the
available menu choices in the column.
First move to the “SYNTH” column with the [LEFT] and [RIGHT] keys.
Select the Mono-synth of your choice by moving the focus using [UP] and
[DOWN].
Press [RIGHT] once to move the focus to the “MACHINE” column. Select
the machine using [UP] and [DOWN].
Finally you need to press the [ENTER/YES] key to confirm your selection.