User`s manual

MONOMACHINE SYNTHESIS ARRANGEMENT
Monomachine SFX-6/60 USER’S MANUAL 19
LOADING A KIT
1. Open the KIT window.
2. Use the arrow keys to move to the “LOAD” icon. Press [ENTER/YES] to
call the LOAD KIT menu.
3. The screen presents a list of the kits stored in memory. Use the [UP] and
[DOWN] keys to choose among the 128 kit slots. Press [ENTER/YES] to
load the kit of your choice.
If you want to exit without loading a kit, press [EXIT/NO].
• The kit currently loaded is indicated by an inverted selection box.
The focus, when moved away from the kit currently loaded, is a hol-
low square box.
LOADING A CLEAR KIT
To get a clean kit, open the KIT LOAD window as described above and load
a position where no kit was previously saved. The clear positions are indi-
cated with “--” as the kit in the square box focus below.
After loading a clear kit, you will get six tracks loaded with the GND>SIN
machine, and all Track Effects and other parameters reset to default values.
SAVING AND NAMING A KIT
1. Open the kit window.
2. Use the arrow keys to move to the “SAVE” icon. Press [ENTER/YES] to
open the KIT SAVE menu.