User`s manual

QUICK START
14 Monomachine SFX-6/60 USER’S MANUAL
PARAMETER LOCKS
1. To lock parameters to a specific trig in the pattern in grid composing
mode, then hold a [TRIG] key and turn or click an encoder. The parame-
ter connected to the encoder will be inverted to indicate that it now is has
a parameter lock. The corresponding <TRIG> LED will flash rapidly to
indicate that a parameter is locked for that step.
2. In live recording mode, you can lock parameters by turning a knob while
recording.
3. Parameters can be locked for any parameter and track. To lock parame-
ters for a new track, select that track with the [TRACK] button and repeat
the steps above.
4. To remove a single lock in grid edit mode, press and hold the [TRIG] key
and click the encoder connected to the parameter you wish to remove.
You will see that the inverted square around the parameter is removed.
To remove all parameter locks for a trig, hold the [TRIG] key and press
[CLEAR]. The locks are also cleared when the note is removed.