User`s manual

THE LCD USER INTERFACE
Monomachine SFX-6/60 USER’S MANUAL 9
THE LCD USER INTERFACE
The center of the Monomachine SFX-6/60 editing is the LCD graphical inter-
face display. The main interface screen for base pattern edit mode is printed
below:
1. The current tempo. This will show EXT when synced to external tempo.
2. Level bar showing the overall volume level of the machine on the track in
focus.
3. Up to eight Data Entry parameters. At the top are up to four characters
which is an abbreviation that indicate their current function. Below the
function name is a symbol that display the current value of the parameter.
This value will also be displayed in figures as the parameter is altered or
the encoder is pressed.
4. Four rectangular boxes showing the playback position in the pattern.
5. The playback/recording status shown by the standard “rec”, “play” and
“stop” symbols.
6. Name and number of the current kit.
7. The index of the current pattern, ranging from A01 to H16.
8. Specification of the Mono-synth and machine of the track in focus.
LAYER EDIT AND WINDOWS
When a function puts a window on top of the base control window, it will
change the function of certain keys and/or encoders. The keys that are not
used or blocked can still be used to control the layer underneath. For exam-
ple, when you have called the tempo function it will make use of the LEVEL
encoder, but you can still use the DATA ENTRY knobs to control the Data
Entry parameters of the track in focus.
All windows can be closed using the [EXIT/NO] key.