User`s manual

USER INTERFACE AND CONNECTORS
8 Monomachine SFX-6/60 USER’S MANUAL
from the MIDI IN port, so it can be used for daisy chaining other MIDI
units.
4. Switch all units on.
5. If you do not have any previous experience of the Monomachine we sug-
gest that you follow the “QUICK START” on page 11.
CARE INSTRUCTIONS
To ensure many years of trouble free operation, please follow the advice
below:
• Never use any aggressive cleaners on the casing or the LCD over-
lay. Remove dust, dirt and fingerprints with a soft dry cloth. More
persistent dirt can be removed with a slightly damp cloth using only
water.
• Never use sharp objects near the display to avoid scratches or dam-
age. Also avoid applying any pressure to the display itself.
• When transporting the Monomachine, try to use the box in which it
was originally shipped with the padding supplied, or equivalent
packaging. For the SFX-60 we can recommend using the specially
designed transportation bag for sale at the Elektron webpage.
• Make sure that you place the unit on a stable surface before use. If
you mount the unit in a rack, be sure to tighten all four screws in the
rack mount holes.
• The memory used for storing patches and kits is powered by a bat-
tery inside the unit. It will hold data at least 6 years before needing
replacement. If the battery needs replacement, the “battery low”
message will appear in the display. Contact Elektron support or your
nearest repair center.