User`s manual

USER INTERFACE AND CONNECTORS
6 Monomachine SFX-6/60 USER’S MANUAL
KEYBOARD INTERFACE, SFX-6
1. Joystick, for real-time expression control. The joystick can individually
control parameters for all tracks.
2. Keyboard, for real-time playing, real-time recording and grid recording.
3. [MULTI TRIG] key, used for toggling the Multi Trig mode. The current
state of the Multi Trig is indicated by the <MULTI TRIG> LED above. The
secondary function is to toggle the [MULTI MAP] mode. Multi Map is indi-
cated by the <MULTI TRIG> LED flashing.
4. [OCTAVE] keys. Control which octaves the Keyboard is playing, and
which notes are represented on the <KEYBOARD> LED’s.
5. <KEYBOARD> LED’s. Shows the notes being played on the active track,
or programmed on a step selected in Grid edit mode.
REAR CONNECTORS
1. Power On/Off switch (SFX-60 only).
2. AC 6 Volt power in (SFX-60 only).
• Caution! Use only an Elektron-approved power supply with your
Monomachine SFX-60. Tip specifications: 5.5mm outer diameter,
2.5mm inner diameter, Electrical specifications: 6 Volts AC at
2000mA, 50/60Hz. Using the wrong type of adapter may result in
damage to your unit. Damage caused by the use of incorrect power
supply is not covered by warranty.
3. MIDI Thru/Out/In
4. Audio Input B/A
5. Individual Audio Outputs F/E/D/C
6. Main/Individual Audio Outputs B/A
7. Stereo Headphone Outputs (Amplified copy of output AB)