User`s manual

A-2 Appendix A: MACHINE REFERENCE
Two additional Unison Extended Oscillators
(saw tooth) are located over and under the
base pitch, at double the Unison Width. Their
level is controlled with the Unison Extended
Level (UNIX) parameter. Unison Extended
Level is limited by the Unison Level, so to get
any effect from the Unison Extended Level,
Unison Level has to be increased first.
SuperWave Saw offers three sub oscillators:
The SUBX parameter controls a Square sub
oscillator, located one octave below the base
pitch.
The SUB1 parameter controls a Sine sub
oscillator, located one octave below the base
pitch.
The SUB2 parameter controls a Sine sub
oscillator, located two octaves below the
base pitch.
SUPERWAVE PULSE “SWAVE-PULSE”
The SuperWave Pulse machine offers five
analogue style oscillators, three of which
offer Pulse Width Modulation.
UNIL - Unison Level
UNIW - Unison Width
SUB1 - Sub Oscillator, 1oct, Sine
SUB2 - Sub Oscillator, 2oct, Sine
PW - Pulse Width
PWAD - Pulse Width Add (sweep)
PWRS - Pulse Width sweep note-on ReStart
The core of the sound is made up from one
base pulse oscillator.
The Unison Level (UNIL) parameter con-
trols the Unison Oscillators pair of pulse
oscillators, located over and under the base
pitch. The distance from these Unison Oscil-
lators to the base pitch is controlled by the
Unison Width (UNIW) parameter.
The Pulse Width of the base oscillator and
the two Unison Oscillators can be controlled
with the Pulse Width (PW) parameter. The
center value (0) of the Pulse Width gives a
square form, and the higher and lower set-
tings turn the waveform towards spike form.
The Pulse Width can be sweeped between
square and spike forms using the Pulse
Width Add (PWAD) parameter. Setting the
PWAD parameter to zero turns off the pulse
sweep. The pulse sweep speed increases
with higher settings of PWAD.
If Pulse Width ReStart PWRS is activated,
the pulse sweep controlled with the PWAD
parameter will restart from the PW position
each time a note-on is played.
The SUB1 parameter controls a Sine sub
oscillator, located one octave below the base
pitch.
The SUB2 parameter controls a Sine sub
oscillator, located two octaves below the
base pitch.