User`s manual

USER INTERFACE AND CONNECTORS
4 Monomachine SFX-6/60 USER’S MANUAL
USER INTERFACE AND CONNECTORS
FRONT / MAIN CONTROL PANEL
The Monomachine SFX-6 main control panel / SFX-60 front panel:
1. Master volume control. Sets the volume for the main output and head-
phone jack.
2. The LCD graphical interface display.
3. LEVEL encoder. Sets the overall volume level of the track in focus.
4. DATA ENTRY encoders. Used for tweaking parameters for the
machines and effects.
• The DATA ENTRY and LEVEL encoders allow accelerated editing by
pressing the knob while turning it.
5. [DATA PAGE] selection keys. These keys are used for selecting the
focus of the DATA ENTRY encoders. The current selection is indicated
by the <DATA PAGE> LED’s to the left of these keys. Press both [DATA
PAGE] keys simultaneously to open the Multi Env window.
6. [TRACK] keys 1-6. These keys are used for selecting which track is in
focus of editing. The secondary function is to [MUTE] or activate the
track. The <TRACK> LED’s are located to the left of the [TRACK] keys.
These indicate which tracks are active or muted, and also which track is
in the editing focus. The LED colours indicate as follows: Green =
Active, Non-lit = Muted, Red = Active in focus, Yellow = Muted in focus
7. [TEMPO] key. Press to bring up the tempo window for adjustment. The
current tempo is always indicated by the speed the <TEMPO> LED is
flashing. Holding function you can use [TEMPO] for tapping the tempo.