User`s guide

40
Modulation Menu
The modulation pop-up menu, located under the “Modulation”
label, allows the output of a module’s DSP process to control
another module (or the same module).
Every module allows you to define up to two independent
modulations. Each of these modulations is routed to a destination
module specified by the Dest Menu, with a modulation amplitude
(depth) specified by the Mod Amp field.
To select a modulation:
1. Hold the mouse button down over the modulation pop-up.
2. Select the desired modulation type and release the mouse button.
The name of the selected modulation will appear on the pop-up
menu.
3. Use the “Dest” pop-up menu to specify the destination (“target”)
module that you want this modulation to control.
4. Specify the modulation depth by typing a percentage into the
Mod Amp field.