User`s guide

26
Left/Right Output Buttons
To enable a module’s left or right output:
Click to light the appropriate left or right output button.
These buttons let you send the module’s left or right outputs to the
overall left/right output mix. The associated text entry field lets you
specify the output amplitude in percent.
All of the checked left outputs are averaged together and sent to the
left output bus; similarly for the right channel. Signals are averaged
(instead of being added) so that volumes won’t vary drastically from
one patch to another.
If the current module serves only as a modulation source, you will
want to disable its output by turning the output buttons off.
Clipping / Limiting Indicator
The Clipping Indicator lights up to show that clipping (signal
distortion) or limiting have occurred.
If clipping or limiting occurs, you may want to adjust the master
volume or other parameters that may be causing signal overflow.
See Chapter 4 for more information about the Limiter.