User`s guide

24
To create a Master Volume slider (“E”), which must link to
multiple fields having different values, first [alt- or option-] click
on the Left Output amplitude field in Module 2. Then hold down
the shift key along with the alt or option key, and click on the
Right Output amplitude for Module 2, the Left Output amplitude
for Module 6, and the Right Output amplitude for Module 6. Now
you can control all four output amplitudes from one slider, while
preserving their correct relative levels.
Go to the Slider Screen. Set slider “E” to a different value (for
example, ~100%).
If you go back to the Preset Editor, you will notice that the Output
levels for Module 6 have changed proportionally, from 150% to
30%.
14. You may want to give the output sliders more informative
descriptions, as shown below:
By now, you should have a pretty good idea of how the Preset
Editor works and what you can do with it. The next three chapters
discuss the elements of the Preset Editor in greater depth.