User`s guide

12
For example, let’s say you have a low-frequency oscillator which is
set to 5 Hz. When you click the Tempo Sync button, this should get
quantized to the nearest power-of-two multiple of the host tempo.
If your host tempo is 120 beats per minute, which equals 2 Hz, the
nearest power-of-two multiple of the host tempo will be 4 Hz,
which is 2 times the host tempo. So the slider’s value should change
from “5 Hz” to “2 x host tempo.”
Likewise, imagine you have a delay which is set to 200 ms., which
equals 1/5 Hz. The 5 Hz frequency should get quantized to the
nearest power-of-2 multiple of the host tempo. If your host tempo
is 120 bpm (which equals 2 Hz), the nearest power-of-two multiple
would be 4 Hz, which is 2 times the host tempo. So the slider’s
value should change from “200 ms.” to “2 x Host Tempo.”