User`s guide
Devices to Notify
If you have a Monnit Control or Notier A/V device on your network, you will also see
a “Devices to Notify” tab. This will allow the notication to interact with these types of
devices. Select a device from the list on the left and click the arrow button to add it to
the recipient list. Clicking the control icon toggles their setting.
Note: Control devices have two relays per device that are controlled separately. You can turn a
relay on, off or toggle the state. You can also set a duration by clicking on the timer icon. This will
perform the selected toggle (on/off/toggle) for a set duration, then change back.
5. Exporting Sensor Data
Clicking on the “Export” tab within the sensor data window allows you to export sensor data
to a comma separated value (.csv) le or send the sensor data to an external web source.
To export sensor data you must rst select the date range for the data you want to export.
Once the date range is selected, determine whether you want sensor data from the
selected sensor only, from all sensors in the network or all sensors assigned to the ac-
count. When you are nished, click on “Export Data” at the bottom of this window. The
data will be exported to a comma separated value (.csv) le format. Note: Only the rst 2,500
records within the selected date range will be exported.
You can alternately send your sensors’ incoming data to a 3rd party by clicking on the
“Congure data push” button at the bottom of the window. From this area you can pass
data from your wireless sensor network devices to another service in real time. This is done
by coding the data into a url query then sending the data via http get request at the time
data is received. There is an extensive list of parameters that can be passed, as listed in
the viewed window, that allow you to send detailed information about both the data and the
sensor.
PAGE 11