Product data

4. Editing and Adding Notications
Notications for a single sensor can be created, deleted or edited by clicking the
“Notications” tab in a sensor’s detail view.
Notications can be created, deleted or edited for any sensor or group of sensors by
clicking on “Notications” in the main menu.
The Notication List Window
Create a New
Notication
Edit Notication
Click to Enable /
Disable a
Notication
View / Edit / Delete
Notication
To create a new notication, click on “Create new notication”, then name the
notication and select the type of notication you would like to create.
Class of Notication
There are four notication options available when creating a new notication.
• Application - Application notications are sensor specic (i.e. water sensor = trig-
ger alert when water present, temp sensor = trigger alert when temp is above 70F,
etc.). If creating an application specic notication, you will need to choose what
sensor type you are creating the alert for. The system will automatically populate a
list of sensor types that are currently being used within the network. The noticatiion
you create will be based on the selected sensor type.
• Inactivity - Set-up “Inactivity” notications to alert you when your sensors have
stopped communicating with the servers. Failure to set up an “Inactivity” notica-
tion will result in no email/SMS txt being sent should your sensors stop communi-
cating with the servers.
• Low battery - Allows users to dene a battery power percentage level that will trig-
ger an alert from the system, warning them to replace batteries.
• Advanced Notications - Allows the user to set notications based on more ad-
vanced rules, such as comparing past data points with the current one to determine
if the notication should be sent.
PAGE 9