User`s guide
PAGE 7
3. Conguring Sensor Settings
To edit a sensors operation settings, click on the sensor overview row to display the de-
tails view. Click on the “Edit” tab to access the sensor conguration panel.
The sensor edit panel allows you to set the primary congurations for the sensor. Mousing
over the question mark icon by each setting will provide an explanation of that setting.
When you have nished making changes, press the “Save” button at the
bottom of this section.
Note: Be sure to click the “Save” button anytime you make a change to any of the sensor parameters.
All changes made to the sensor settings will be downloaded to the sensor on the next sensor heartbeat
(check-in). Once a change has been made and “Saved,” you will not be able to edit that sensor’s
congurations again until the sensor has downloaded the new setting.