User`s guide

• When nished, click the “Reboot” button on the top right side of the page to restart the
gateway.
• When the lights begin ashing on the gateway, you can unplug the power to the gate-
way and disconnect it from the computer.
• Reactivate the Wi-Fi or other Internet connection for the computer, so it can connect to
the network.
• Plug your Ethernet gateway into your Internet router and power up the Ethernet
gateway. All three lights should go green now, and your gateway should report into
Monnit Express.
If it does not, check that the PC has the internet connection turned on, recheck your IP
Address, power up your gateway and make sure the gateway is added into Monnit
Express. (If you left your secondary set to point to sensorsgateway.com (which is
iMonnit) and the lights on your gateway are green, check iMonnit to see if the gateway
is reporting in there. If so, power cycle the gateway and try again.)
PAGE 19