User`s guide

Data 1 Sensor Data Field 1 40109 108
Data 2 Sensor Data Field 2 40110 109
Data 3 Sensor Data Field 3 40111 110
Data 4 Sensor Data Field 4 40112 111
Data 5 Sensor Data Field 5 40113 112
Data 6 Sensor Data Field 6 40114 113
Data 7 Sensor Data Field 7 40115 114
Data 8 Sensor Data Field 8 40116 115
SNMP Poll and Trap Interface
Use SNMP software to pull in gateway and sensor data. Monnit provides a .MIB le.
There are four available interfaces. Set the SNMP Interface Address for each one the
address of the device sending the SNMP request). Mark the interface Active and Save.
The MIB le is available through here:
resources.monnit.com/content/downloads/MonnitEGW-MIB_v1
The MIB Tree looks like this:
PAGE 15