Instructions

GETTING STARTED
To get you started with your kit, please follow the steps below. This does not use
any of the MonkMakes add-on boards, so for now you don't need the alligator clips.
If you have already used your micro:bit for other things, you can probably skip this
section.
Step 1. Plug your micro:bit into your computer.
Connect your micro:bit to a free USB port on your computer.
If your micro:bit is new, then its LED display will start displaying messages and
showing off various features of the micro:bit. You are going to replace this program
currently running on your micro:bit with a new one.
Step 2. Open The Blocks Editor
To install the new program (incidentally the program is called welcome) onto your
micro:bit, you first need to open it in the Blocks Editor. You can do this by going to
the following page on your computer's web browser by clicking on the link below:
https://makecode.microbit.org/_R0YbTwiDs0pE
This will open a tab that looks like this:
Page 6