Specifications

Step 7:lnstall Flue Pipe B
Wall Thickness: 5-8'/? inches
1. Slide the outer flange and the rubber packing onto
Flue pipe B.(Figure 11)
Rubber Packing Outer Flange
Rubber Packing Outer Flange
Fig. 11
Flue Pipe B
2. Spread caulking material on the inside of the rubber
packing if required.(Figure 12)
Rubber Packing
Fig. 12
3. It is important to keep the "UP" mark on the rubber
packing at the top while screwing in Flue pipe B. Hold
the packing in place while screwing in Flue pipe B
until it is the tight. (Figure 13)
Rubber Packing
UP"
Fig. 13 Flue Pipe B
Wall Thickness: v« -5 inches
1. Set the Sleeve Nut on the Flue Pipe B and turn the
Sleeve Nut counterclockwise. Slide the Outer Flange
and the Rubber Packing onto the Flue Pipe B.
(Figure 14)
Rubber Packing
Outer Flange
Outer Flange
Flue Pipe B
Sleeve Nut
2. Spread caulking material on the inside of the Rubber
Packing if required. (Figure 12)
3. It is important to keep the "UP" mark on the Rubber
Packing at the top while screwing in the Flue Pipe B.
Hold the Rubber packing in place while screwing in
the Flue Pipe B until it is the tight. (Figure 13)
4. Turn the Sleeve Nut clockwise and tighten.
(Figure 15)
Flue Pipe A
Rubber Packing
Outer Flange
Sleeve Nut
Flue Pipe B
Fig. 15
12