Specifications

Step 7:lnstall Flue Pipe B
Wall Thickness: 5-8'/? inches
1. Slide the outer flange and the rubber packing onto
Flue pipe B. (Figure 10)
Rubber Packing
Outer Flange
Rubber Packing Outer Flange
Fig. 10
Flue Pipe B
2. Spread caulking material on the inside of the rubber
packing if required. (Figure 11)
Rubber Packing
Fig. 11
3. It is imprlant to keep the "UP" mark on the rubber
packing at the top while screwing in Flue pipe B. Hold
the packing in place while screwing in Flue pipe B
until it is the tight. (Figure 12)
Rubber Packing
Fig. 12
Flue Pipe B
Wall Thickness:
3
/s -5 inches
1. Set the Sleeve nut onto Flue Pipe B by turning the
Sleeve Nut counter-clockwise. Slide the Outer Flange
and the Rubber Packing onto Flue Pipe B.
(Figure 13)
Rubber Packing
Rubber Packing
y,\ , ~
Outer Flange
Outer Flange
Sleeve Nut
Fig. 13
Flue Pipe B
Sleeve Nut
2. Spread caulking material on the inside of the Rubber
Packing if required. (Figure 11)
3. It is important to keep the "UP" mark on the Rubber
Packing at the top while screwing in the Flue Pipe B.
Hold the Rubber packing in place while screwing in
the Flue Pipe B until it is the tight. (Figure 12)
4. Turn the Sleeve Nut clockwise and tighten.
(Figure 14)
Flue Pipe A
Rubber Packing
/
Outer Flange
Sleeve Nut
Flue Pipe B
Fig. 14
13