Technical data

FastIron Ethernet Switch Administration Guide 35
53-1002637-02
Network Time Protocol Version 4 (NTPv4)
2
Displaying NTP associations
Use the show ntp associations command to display detailed association information of the NTP
server or peers.
Brocade# show ntp associations
address ref clock st when poll reach delay offset disp
*~172.19.69.1 172.24.114.33 3 25 64 3 2.89 0.234 39377
~2001:235::234
INIT 16 - 64 0 0.00 0.000 15937
* synced, # selected, + candidate, - outlayer, x falseticker, ~ configured
Table 7 show ntp associations command output descriptions
peer dispersion Dispersion of root path.
system poll interval Poll interval of the local system.
last update Time the router last updated its NTP informa-
tion.
server mode Status of the NTP server mode for this device.
client mode Status of the NTP client mode for this device.
master Status of the master mode.
master stratum Stratum number that will be used by this
device when master is enabled and no
upstream time servers are accessible.
panic mode Status of the panic mode.
TABLE 7 NTP associations command output descriptions
Field Description
* The peer has been declared the system peer
and lends its variables to the system variables.
# This peer is a survivor in the selection algo-
rithm.
+ This peer is a candidate in the combine algo-
rithm.
- This peer is discarded as outlier in the cluster-
ing algorithm.
x This peer is discarded as 'falseticker' in the
selection algorithm.
~ The server or peer is statically configured.
address IPv4 or IPv6 address of the peer.
ref clock IPv4 address or first 32 bits of the MD5 hash of
the IPv6 address of the peer to which clock is
synchronized.
St Stratum setting for the peer.
TABLE 6 NTP status command output descriptions
Field Description