Technical data

370 FastIron Ethernet Switch Administration Guide
53-1002637-02
Syslog messages
A
Notification OSPF virtual nbr state changed, rid router-id,
nbr addr ip-addr, nbr rid nbr-router-id, state
ospf-state
Indicates that the state of an OSPF virtual
neighbor has changed.
The router-id is the router ID of the Brocade
device.
The ip-addr is the IP address of the
neighbor.
The nbr-router-id is the router ID of the
neighbor.
The ospf-state indicates the state to which
the interface has changed and can be one
of the following:
• down
• attempt
• initializing
• 2-way
• exchange start
• exchange
• loading
• full
• unknown
Notification Transit ICMP in interface portnum exceeds
num burst packets, stopping for num
seconds!!
Threshold parameters for ICMP transit
(through) traffic have been configured on
an interface, and the maximum burst size
for ICMP packets on the interface has been
exceeded.
The portnum is the port number.
The first num is the maximum burst size
(maximum number of packets allowed).
The second num is the number of seconds
during which additional ICMP packets will
be blocked on the interface.
NOTE: This message can occur in response
to an attempted Smurf attack.
Notification Transit TCP in interface portnum exceeds
num burst packets, stopping for num
seconds!
Threshold parameters for TCP transit
(through) traffic have been configured on
an interface, and the maximum burst size
for TCP packets on the interface has been
exceeded.
The portnum is the port number.
The first num is the maximum burst size
(maximum number of packets allowed).
The second num is the number of seconds
during which additional TCP packets will be
blocked on the interface.
NOTE: This message can occur in response
to an attempted TCP SYN attack.
TABLE 1 Brocade Syslog messages (Continued)
Message level Message Explanation