Technical data

364 FastIron Ethernet Switch Administration Guide
53-1002637-02
Syslog messages
A
Notification OSPF intf rcvd bad pkt: Bad Checksum, rid
ip-addr, intf addr ip-addr, pkt size num,
checksum num, pkt src addr ip-addr, pkt
type type
The device received an OSPF packet that
had an invalid checksum.
The rid ip-addr is the Brocade router ID.
The intf addr ip-addr is the IP address of the
Brocade interface that received the packet.
The pkt size num is the number of bytes in
the packet.
The checksum num is the checksum value
for the packet.
The pkt src addr ip-addr is the IP address of
the neighbor that sent the packet.
The pkt type type is the OSPF packet type
and can be one of the following:
• hello
• database description
• link state request
• link state update
• link state acknowledgement
• unknown (indicates an invalid packet
type)
Notification OSPF intf rcvd bad pkt: Bad Packet type, rid
ip-addr, intf addr ip-addr, pkt size num,
checksum num, pkt src addr ip-addr, pkt
type type
The device received an OSPF packet with an
invalid type.
The parameters are the same as for the
Bad Checksum message. The pkt type type
value is “unknown”, indicating that the
packet type is invalid.
Notification OSPF intf rcvd bad pkt: Invalid packet size,
rid ip-addr, intf addr ip-addr, pkt size num,
checksum num, pkt src addr ip-addr, pkt
type type
The device received an OSPF packet with an
invalid packet size.
The parameters are the same as for the
Bad Checksum message.
Notification OSPF intf rcvd bad pkt: Unable to find
associated neighbor, rid ip-addr, intf addr
ip-addr, pkt size num, checksum num, pkt
src addr ip-addr, pkt type type
The neighbor IP address in the packet is not
in the list of OSPF neighbors in the Brocade
device.
The parameters are the same as for the
Bad Checksum message.
TABLE 1 Brocade Syslog messages (Continued)
Message level Message Explanation