Technical data

FastIron Ethernet Switch Administration Guide 363
53-1002637-02
Syslog messages
A
Notification OSPF intf config error, rid router-id, intf addr
ip-addr, pkt src addr src-ip-addr, error type
error-type, pkt type pkt-type
Indicates that an OSPF interface
configuration error has occurred.
The router-id is the router ID of the Brocade
device.
The ip-addr is the IP address of the
interface on the Brocade device.
The src-ip-addr is the IP address of the
interface from which the Brocade device
received the error packet.
The error-type can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Notification OSPF intf rcvd bad pkt, rid router-id, intf addr
ip-addr, pkt src addr src-ip-addr, pkt type
pkt-type
Indicates that an OSPF interface received a
bad packet.
The router-id is the router ID of the Brocade
device.
The ip-addr is the IP address of the
interface on the Brocade device.
The src-ip-addr is the IP address of the
interface from which the Brocade device
received the authentication failure.
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
TABLE 1 Brocade Syslog messages (Continued)
Message level Message Explanation