Technical data

362 FastIron Ethernet Switch Administration Guide
53-1002637-02
Syslog messages
A
Notification OSPF interface state changed,
rid router-id, intf addr ip-addr,
state ospf-state
Indicates that the state of an OSPF
interface has changed.
The router-id is the router ID of the Brocade
device.
The ip-addr is the interface IP address.
The ospf-state indicates the state to which
the interface has changed and can be one
of the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
Notification OSPF intf authen failure, rid router-id, intf
addr ip-addr, pkt src addr src-ip-addr, error
type error-type, pkt type pkt-type
Indicates that an OSPF interface
authentication failure has occurred.
The router-id is the router ID of the Brocade
device.
The ip-addr is the IP address of the
interface on the Brocade device.
The src-ip-addr is the IP address of the
interface from which the Brocade device
received the authentication failure.
The error-type can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
TABLE 1 Brocade Syslog messages (Continued)
Message level Message Explanation