Technical data

350 FastIron Ethernet Switch Administration Guide
53-1002637-02
Syslog messages
A
Alert MAC Authentication failed for mac-address
on portnum (No VLAN Info received from
RADIUS server)
RADIUS authentication was successful for
the specified mac-address on the specified
portnum; however, dynamic VLAN
assignment was enabled for the port, but
the RADIUS Access-Accept message did not
include VLAN information. This is treated as
an authentication failure.
Alert MAC Authentication failed for mac-address
on portnum (Port is already in another radius
given vlan)
RADIUS authentication was successful for
the specified mac-address on the specified
portnum; however, the RADIUS
Access-Accept message specified a VLAN
ID, although the port had previously been
moved to a different RADIUS-assigned
VLAN. This is treated as an authentication
failure.
Alert MAC Authentication failed for mac-address
on portnum (RADIUS given vlan does not
exist)
RADIUS authentication was successful for
the specified mac-address on the specified
portnum; however, the RADIUS
Access-Accept message specified a VLAN
that does not exist in the Brocade
configuration. This is treated as an
authentication failure.
Alert MAC Authentication failed for mac-address
on portnum (RADIUS given VLAN does not
match with TAGGED vlan)
Multi-device port authentication failed for
the mac-address on a tagged port because
the packet with this MAC address as the
source was tagged with a VLAN ID different
from the RADIUS-supplied VLAN ID.
Alert Management module at slot slot-num state
changed from module-state to module-state.
Indicates a state change in a management
module.
The slot-num indicates the chassis slot
containing the module.
The module-state can be one of the
following:
• active
• standby
• crashed
• coming-up
• unknown
Alert OSPF LSA Overflow, LSA Type = lsa-type Indicates an LSA database overflow.
The lsa-type parameter indicates the type of
LSA that experienced the overflow
condition. The LSA type is one of the
following:
• 1 – Router
• 2 – Network
• 3 – Summary
• 4 – Summary
• 5 – External
Alert OSPF Memory Overflow OSPF has run out of memory.
TABLE 1 Brocade Syslog messages (Continued)
Message level Message Explanation