Technical data

348 FastIron Ethernet Switch Administration Guide
53-1002637-02
show sysmon system sfm
show sysmon system sfm
Displays the status of the switch fabric modules.
Syntax show sysmon system sfm {all | number}
Parameters all Displays the statistics for all SFMs on the device.
number Specifies the SFM ID for which the statistics is to be displayed.
Command
Modes
User EXEC mode.
Privileged EXEC mode.
Global configuration mode.
Usage
Guidelines
This command is supported only on FSX devices.
Examples The following command displays the statistics for all SFMs on the device.
Brocade(config)# show sysmon system sfm all
SFM= 1,Xbar= 2
X-link Status FlowCtrl FA-dev/Link Status FlowCtrl
2 OK 0x0 19/0 OK 0x0
3 OK 0x0 13/0 OK 0x0
4 OK 0x0 0/1 OK --
5 OK 0x0 3/0 OK 0x0
7 OK 0x0 10/1 OK --
8 OK 0x0 7/0 OK 0x0
9 OK 0x0 17/0 OK 0x0
=======================================================
SFM= 1,Xbar= 3
X-link Status FlowCtrl FA-dev/Link Status FlowCtrl
1 OK 0x0 17/1 OK 0x0
2 OK 0x0 3/1 OK 0x0
4 OK 0x0 0/2 OK --
5 OK 0x0 19/1 OK 0x0
7 OK 0x0 10/2 OK --
10 OK 0x0 7/1 OK 0x0
11 OK 0x0 13/1 OK 0x0
=======================================================
History
Related
Commands
clear sysmon counters
Release Command History
08.0.00a This command was introduced.