Technical data

346 FastIron Ethernet Switch Administration Guide
53-1002637-02
show sysmon config
show sysmon config
Displays the complete sysmon configuration, including the global configuration and the
event-specific configuration.
Syntax show sysmon config
Command
Modes
User EXEC mode.
Privileged EXEC mode.
Examples The following command displays the sysmon configuration an FSX device. The global configuration
is displayed first, followed by the configuration for specific events.
Brocade> show sysmon config
======================================
System Monitoring (Sysmon) is: enabled
Sysmon timer = 3 minutes
======================================
Threshold: Times error detected / Consecutive times event polling.
Log Backoff Number: Number of times skip log before log again.
======================================
Sysmon Event: FA_ERROR_COUNT (Enabled)
Threshold: 2/10
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: FA_LINK (Enabled)
Threshold: 2/10
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: XBAR_ERROR_COUNT (Enabled)
Threshold: 2/10
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: XBAR_LINK (Enabled)
Threshold: 2/10
Log Backoff Number: 10
Action: log(internal) /syslog
Sysmon Event: PP_ERROR_COUNT (Enabled)
Threshold: 2/10
Log Backoff Number: 10
Action: log(internal) /syslog
The following example displays the sysmon configuration on an FCX device:
Brocade(config)#show sysmon config
======================================
System Monitoring (Sysmon) is: enabled
Sysmon timer = 3 minutes
======================================
Threshold: Times error detected / Consecutive times event polling.
Log Backoff Numner: Number of times skip log before log again.
======================================