Technical data

FastIron Ethernet Switch Administration Guide 341
53-1002637-02
show sysmon logs
show sysmon logs
Displays the entries written to syslog for all event types if the action specified is to log them into
syslog. If the action specified is none, the sysmon logs display nothing.
Syntax show sysmon logs
Command
Default
All syslog messages are displayed.
Command
Modes
Privileged EXEC mode.
Global configuration mode.
Examples The following example displays the syslog entries that were made by sysmon if the action specified
either at the global level or type level was to log the events to syslog. If the action specified was
none, no syslog entries exist.
Brocade(config)# show sysmon logs
Aug 3 03:59:22:C:Sysmon:XBAR LINK: SFM1/XBAR1/FPORT0 -- NO SYNC
Aug 3 03:59:22:C:Sysmon:FA Link: SLOT9/FA16/Link0 -- HG.Link error
Aug 3 03:58:22:W:Sysmon:PP ERROR: SLOT4/PP6 error occurred
Aug 3 03:59:34:W:Sysmon:FA ERROR: SLOT1/FA0 error occurred
Aug 3 03:60:34:W:Sysmon:XBAR ERROR: SFM1/XBAR1/FPORT2 –error occurred
The following table describes the output of this command:
History
Related
Commands
show sysmon counters, clear sysmon counters
TABLE 37 show sysmon log s command output fields
Field Description
Date and time Aug 3 03:59:22
Critical or Warning A ‘C’ indicates a critical error and a ‘W’ indicates a warning.
Sysmon Message coming from Sysmon
Event type Possible values are FA ERROR, FA Link, XBAR ERROR, XBAR LINK, or PP ERROR
Component identifier Identifies the component of the system where the error was detected
Error A brief description of the error
Release Command History
08.0.00a This command was introduced.