Technical data

330 FastIron Ethernet Switch Administration Guide
53-1002637-02
sysmon fa error-count
sysmon fa error-count
Configures how sysmon handles fabric adaptor-related errors. The no version of this command
disables system monitoring on fabric adaptors.
Syntax sysmon fa error-count {threshold events polling-interval | log-backoff value | action {none |
syslog}}
no sysmon fa error-count
Command
Default
By default, the command takes the global values defined for threshold, log back-off, and action.
Parameters threshold Defines the threshold for errors. The threshold is defined as N/W, where N is
the number of events, and W is the number of consecutive polling periods.
When the threshold is reached, actions configured for this event type will take
place. Note that a threshold of 1/W implies that there is no threshold, and
the action will always be triggered.
events Specifies the threshold in terms of the number of events. Valid values are 1
through 10.
polling-interval Specifies the number of polling windows. The device polls the internal
registers at the interval specified by the sysmon timer value. Valid values
1-32. However, the polling window number must be equal or greater than the
number of events.
log-backoff If an error condition persists, it will be continuously logged (internally and/or
externally to syslog as defined by the action). The log back-off count skips
configured number of logs before logging again.
action Specifies the action to take when a fabric adapter error count exceeds the
specified threshold and log back-off values.
none The error is logged in the internal sysmon logs. This is the default value.
syslog The error is logged to syslog.
Command
Modes
Global configuration mode.
Usage
Guidelines
This command is supported only on FSX devices.
Examples The following example configures system monitoring for fabric adaptor errors:
Brocade(config)# sysmon fa error-count threshold 3 7
Brocade(config)# sysmon fa error-count action syslog
Brocade(config)# sysmon fa error-count log-backoff 15
History
Release Command History
08.0.00a This command was introduced.