Technical data

276 FastIron Ethernet Switch Administration Guide
53-1002637-02
sFlow
11
Syntax: [no] sflow destination ip-addr [dest-udp-port | vrf]
The ip-addr parameter specifies the IP address of the collector.
The dest-udp-port parameter specifies the UDP port on which the sFlow collector will be listening
for exported sFlow data. The default port number is 6343. For information on VRF parameter, see
the FastIron Layer 3 Routing Configuration Guide.
The sampled sFlow data sent to the collectors includes an agent_address field. This field identifies
the device that sent the data. Refer to “sFlow and source address” on page 273.