Technical data

FastIron Ethernet Switch Administration Guide 221
53-1002637-02
LLDP-MED configuration
8
NOTE
This feature applies to applications that have specific real-time network policy requirements, such
as interactive voice or video services. It is not intended to run on links other than between Network
Connectivity devices and Endpoints, and therefore does not advertise the multitude of network
policies that frequently run on an aggregated link.
To define an LLDP-MED network policy for an Endpoint, enter a command such as the following.
Brocade(config)#lldp med network-policy application voice tagged vlan 99 priority
3 dscp 22 port e 2/6
The network policy advertisement will appear similar to the following on the remote device, and in
the CLI display output on the Brocade device (show lldp local-info).
NOTE
Endpoints will advertise a policy as “unknown” in the show lldp neighbor detail command output, if
it is a policy that is required by the Endpoint and the Endpoint has not yet received it.
+ MED Network Policy
Application Type : Voice
Policy Flags : Known Policy, Tagged
VLAN ID : 99
L2 Priority : 3
DSCP Value : 22