Technical data

ManualsBrandsMonitor Products, Inc ManualsBoilerFCX-

141

142

143

144

145

146

147

148

149

150

128 FastIron Ethernet Switch Administration Guide

53-1002637-02

Licensing for Ports on Demand

The unit id parameter specifies the unit ID number of the PoD you want to display.

Table 20 describes the information displayed in the output of the show pod unit command.

TABLE 20 Output from the show pod unit command

Displaying license configuration for PoD ports for ICX 6450 devices

By default at bootup, the license state for ports 2 and 4 are in the acquired state. The following

output from the show pod command displays port 2 and 4 as acquired. Upon installing the

ICX6450-2X10G-LIC-POD license, ports 2 and 4 can be enabled to run in 10 Gbps port speed. The

license state for ports 2 and 4 remains in the acquired state.

Brocade#sh pod

Unit-Id: 1

PoD-ports Lic-Available Lic-Used

1/2/2 Yes Yes

1/2/4 Yes Yes

Unit-Id: 2

PoD-ports Lic-Available Lic-Used

2/2/2 Yes Yes

2/2/4 Yes Yes

If ports 2 and 4 are configured to 1 Gbps port speed, the license state changes to default. The

following output from the show pod command displays port 2 and 4 in the default state.

Brocade#sh pod

Unit-Id: 1

PoD-ports Lic-Available Lic-Used

1/2/2 No No

1/2/4 No No

Syntax: show pod [unit id]

The unit id parameter specifies the unit ID number of the PoD you want to display.

Field Description

Unit-Id The unit ID number of the PoD.

PoD license capacity The port capacity of the PoD license that is purchased. For ICX 6610 devices,

the port capacity can be four or eight 10 Gbps ports. UPPER is displayed in

parentheses when the upper four PoD ports are selected using the

flexible-10g-ports upper command. LOWER is displayed in parentheses when

the four lower PoD ports are selected for an upgrade to 10 Gbps port speed.

PoD license capacity used The number of PoD ports that are upgraded to 10 Gbps port speed.

PoD-ports The list of PoD ports in the PoD unit.

Lic-state The license state of the PoD ports in the PoD unit.The Lic-state can be one of

the following:

• default - The port is configured to 1 Gbps speed.

• acquired - The port is configured to 10 Gbps speed.