Service manual

19
www.monitorproducts.com
38 2363 ADAPTOR FOR VENTOUSE D.80-125
39 2319 SILICONE SEALING D.162X85X4
40 2320 BLACK HANDLE (FOR H3MG VALVE)
41 2321 REDUCED MESSING NIPPLE M1-M3/4
42 2322 NUT
43 2323 BRASS VALVE
44 2324 NUT FOR FLANGE 1” (FOR PIPE D.22,5)
45 2325 STAINLESS STEEL WASHER
30,4X25,5X0,3
46 2326 SIGHTGLASS PYREX D.30X5
47 9012 EXPANSION TANK, VESSEL 8L MALE
3/4
48 2327 SEALING AFM34 D 24X17X3
49 2328 DRAIN VALVE WITH CAP M 1/2 - M 3/4
50 2383 HEATING FLOW BEFORE 1. CIRCUIT
51 2329 CONDENSATE DISCHARGE
52 2330 FRESH AIR INTAKE HOSE
53 2331 MINERAL CARBOARD WASHER D.
25X8,5X3
54 2384 INSULATION CONDENSER FCX
55 2385 HEATING SYSTEM SHELL COVER
EQUIPPED FOR FCX
56 2332 VALVE STOP
57 2386 BASE FOR FCX
58 2387 FLANGE
59 2333 SALMSON SEALING 1 1/2 DIA 44 X 32 X 3
60 2388 CIRCULATING PUMP GRUNDFOSS 115
UPS15.42 F-9H
61 2389 BEND 90° F3/4-F3/8
62 2334 AUTOMATIC DRAIN 3/8 WITH
ISOLATING VALVE
63 2335 FLOW/ RETURN BEND F1-F22
64 2336 SAFETY VALVE 30 PSIG MAL/FEM.
3/4 NPT
65 2385 HEATING SYSTEM SHELL; EQUIPED
* 2337 SEAL VITON D.80
* 2338 FIXING PIECE FOR THE COVER
(MALE)
* BOLT (PVC)
* BAFFLE PLATE F400-F E/FEA-FCX
(250X200X1,5)
* DISK FOR ISOLATION (KERLANE)
* NOT SHOWN ON THE DRAWING
PARTS BREAKDOWN
MPI PARTS # DESCRIPTION
1 2300 FRONT COVER EQUIPPED
2 2301 INSULATION FRONT COVER
3 2302 RIGHT HAND SIDE COVER EQUIPPED
4 2303 INSULATION RIGHT HAND SIDE
5 2367 FOLDED NECK
6 2368 INSULATION FOR SYSTEM SHELL
7 2304 PAINTED CONNECTING FLANGE
8 2305 PAINTED BACK COVER
9 2362 SWIRLERS
10 2369 COMBUSTION CHAMBER
11 2366 MINERAL WOOL 90 KG DISK
DIAMETER 262X20
12 2370 FASTENING ANGLE
13 2371 GLASS FIBER INSULATION LG 950-
CAST PLATE
14 2306 CERAMIC FIBER INSULATION D.280X20
(300°C)
15 2372 HEATING SYSTEM SHELL- CAST IRON
16 2307 TOP COVER EQUIPPED
17 2308 PROTECTING COVER
18 2309 ABS PROTECTION
19 2359 ELECTR. CONTROL BOX + CABLE
20 2373 CONDENSER COVER
21 2311 TOP RING CONDENSER
22 2312 FASTENING FLANGE FOR
CONDENSER COVER
23 2374 CONDENSER (secondary heat exchanger)
24 2313 SEAL AFM34 D. 18,6 X 12 2 MM
THICKNESS
25 2360 BRASS CONNECTION M1/2 - F3/4 NPT
26 2314 LEFT HAND SIDE COVER EQUIPPED
27 2315 INSULATION LEFT HAND SIDE
28 2316 NITRILE O’RING D. 50X4 70 SHORE
29 2376 CLEANING CAP FOR CONDENSER
EQUIPPED
30 2377S HEATING RETURN 2. CIRCUIT SHORT
31 2317 SEALING AFM34D 30X21X3
32 2377L HEATING RETURN 1. CIRCUIT LONG
33 2378 HEATING FLOW 2. CIRCUIT
34 2318 SEALING ON CONDENSER FLANGE
35 2379 HEATING FLOW
36 2380 HEATING SYSTEM SHELL RETURN
37 2381 MALE CONNECTION 3/4