User manual

Reference: Using the Menus
WFM 90 & WFM 91 User Manual
3–7
Configuration Menu ALARMS Category
ALARM. Pressing this Bezel Button toggles the Alarm mode
ON and
OFF for the Waveform and Vector display modes.
Configuration Menu PRESETS Category
STORE. Stores the current keypad and menu settings in memory for
future recall.
RECALL. Resets the keypad and menu settings to match the ones
that were last stored in memory.
DEFAULT. Resets the front panel and menu settings to their
factory-set defaults. Monitoring adjustments such as signal position,
vector phase, and picture hue are also reset. The default settings of
the keypad and menus are listed below.
Display mode Waveform
Signal reference Internal
Filter Flat
DC restorer speed Slow
Gain X1
Variable gain Off
Sweep 2H (2 Line)
Mag Off
Bars 75%
Setup (WFM90 only) Yes
Alt Phase (WFM91 only) Off
Reference dBu 0 dBu
Headroom 3 dB
WIP location Bottom right
Alarms Off
Safe Action Off
Safe Title Off
Vertical shift Off
Backlight time-out Disabled
Instrument time-out Disabled