User manual

Reference: Using the Menus
3–4
WFM 90 & WFM 91 User Manual
AUDIO. Selects the Audio display mode to be shown in the WIP
window.
LOCATION. Cycles the position of the WIP window around the four
corners of the Picture display.
Configuration Menu
The Configuration menu is opened by pressing the CONFIG button.
A list of menu categories is displayed above the left Bezel Button,
while menu selections within the selected category appear over the
right three Bezel Buttons.
The following pages describe the Configuration menu selections,
which are the same for each display mode. The description is
organized in the order that the menu categories appear on the display.
Configuration Menu DISPLAY Category
VIEW. When
VIEW is selected, the right two Bezel Buttons adjust
the viewing angle of the LCD display up or down. This adjustment
allows for optimal viewing of the display from different positions.
BRIGHT. When
BRIGHT is selected, the right two Bezel Buttons
adjust the brightness of the LCD display.
Configuration Menu INTENS Category
TRACE. When
TRACE is selected, the right two Bezel Buttons
adjust the intensity of the signal trace.
GRAT. When
GRAT is selected, the right two Bezel Buttons adjust
the intensity of the measurement graticule.