User manual

Reference: Using the Menus
WFM 90 & WFM 91 User Manual
3–3
Audio Display Mode Operating Menu
REFERENCE dBu. Cycles the Audio reference level through
MIC,
–10, 0, 4, and 8. The reference levels are measured in dBu, while the
MIC level is for testing microphones.
HEADROOM. Toggles the headroom reference level between –3 dB
and +10 dB. The +10 dB setting is used for viewing signal levels
greater than 3 dB over the reference level.
Picture Display Mode Operating Menu
ACTION. Toggles the Safe Action area markers
ON and OFF. This
menu selection appears on the WFM 90 only.
TITLE. Toggles the Safe Title area markers
ON and OFF. This menu
selection appears on the WFM 90 only.
SAFE AREA. Toggles the Safe Area markers
ON and OFF. This
menu selection appears on the WFM 91 only.
V SHIFT. Toggles the vertical shift
ON and OFF. The vertical shift
allows the viewing of the vertical interval on the Picture display. The
vertical interval display does not appear on the
VIDEO OUT signal.
WIP Display Mode Operating Menu
WFM. Selects the Waveform display mode to be shown in the WIP
window.
VECT. Selects the Vector display mode to be shown in the WIP
window.