User manual

WFM 90 & WFM 91 User Manual
3–1
Reference: Using the Menus
This section begins with general information on menu operation.
Descriptions of each menu selection begin on the following pages:
Operating menus page 3–2
Configuration menu page 3–4
Line Select menu page 3–8
General Menu Information
Entering and Exiting Menus
 Pressing the
MENU button opens the Operational menu for the
currently selected display mode.
 Pressing the
CONFIG button opens the Configuration menu,
which is the same for all display modes.
 Pressing the
LINE SEL button turns on the Line Select mode, and
opens the Line Select menu.
 Menus are exited by pressing the entry button for the open menu,
entering another menu, or by turning on the Line Select mode.
 Menus remain open while switching between display modes.
Making Menu Selections
 Menu selections are made by pressing the Bezel Button
corresponding to the desired menu selection.
 When there is more than one menu selection corresponding to a
Bezel Button, a highlight bar toggles through the available menu
selections.
 Menu selections can be only made while a menu is displayed.
The Bezel Buttons are inoperative when there is no menu
displayed.