User manual

Operation Basics: Tutorial
WFM 90 & WFM 91 User Manual
2–17
Return to the Picture display mode and press the right two Bezel
Buttons to adjust the picture color to a desired setting.
Select
PRESETS from the Configuration menu category list and
select
DEFAULT to reset the picture hue and color back to their
proper settings. Select the Picture display mode.
Safe Action. This menu selection appears in the WFM 90 only. Press
the
MENU button to enter the Operating menu. Select ACTION ON
and notice that the Safe Action area is outlined on the display.
Safe Title. This menu selection appears in the WFM 90 only. Select
TITLE ON and notice that the Safe Title area is now also outlined.
Safe Area. This menu selection appears in the WFM 91 only. Press
the
MENU button to enter the Operating menu. Select SAFE AREA
ON
and notice that the Safe Area is outlined on the display.
Vertical Shift. Select
V SHIFT ON and notice that the display has
shifted vertically so that you can see the vertical interval portion of
the video signal.
6. Using the waveform-in-picture (WIP) display
Press the
WIP button to enter the Waveform-in-Picture (WIP) display
mode. Notice that the Waveform display is shown in the 1/4-screen-
sized window over the Picture display, and that the Picture display
does not show the Safe Area(s) or the vertical shift which were left
on in the Picture display mode. The Waveform display is shown in
the WIP window because it was the last display mode selected in the
previous steps.
Press the Arrow Buttons and notice that they still have control of
signal positioning. You have access to all of the Waveform display
controls except those located in the Operating menu. The Operating
menu selections for any display mode can only be changed while that
display mode is selected.