Service manual

Using the Menus
2-20
WFM90D and WFM91D Service Manual
Press the WIP button and the MENU button to open the Waveform-in-Picture
operating menu. Hold the MENU button in for two seconds to open the digital
menu. For more details on menu access, see page 2--17.
WIP menu choices are shown in Table 2--5. The WIP menu tree is shown in
Figure 2--10.
Table 2- 6: WIP menu choices, analog and digital
Submenu Digital only Function
WFM Selects the Waveform mode for display in the WIP
window.
VECT Selects the Vector mode for display in the WIP window.
AUDIO Selects the Audio mode for display in the WIP window.
LOCATION Selects the position of the WIP window in the Picture
display (selects from the four corners of the screen).
EDH RPRT n Enable or dis able the EDH reporting readout at the top
center of the display in Waveform and Vector modes.
CRC WTCH n CRC Watch. Enable or disable the CRC reporting
readout on the right side of the display in Waveform and
Vector modes.
WIP Menu
(Waveform-in-Picture)