Operating instructions

Vidscope-HD User Manual

Manual vidscope-hd v2.doc

1.4 Important Advice

Before using VidScope it is important to be familiar with the settings and

control panel of your video capture card that you will be using with the

VidScope.

For HDV and DV users, this will probably not apply unless a custom DV

capture card is used, rather than the Firewire port of the PC.

Obviously, the most important setting this to check that shall capture

card is set for the correct TV standard that you wish to use. The

VidScope itself automatically varies its input settings and TV standard

being used. The capture card will probably reject an input that does not

match the settings preset. Refer to the manufacturers instructions; help

manual or online guidance on this matter if in doubt

Typical Firewire IEEE1394 Card